Whether you are using it for pleasure (e.g. making bird houses, making a work bench) or for work (e.g. cutting wood flooring boards, building a ramp), table saws are one of the most useful tools that you can have. However, like all tools, table saws can be dangerous and must be used properly. Here are a few tips for using your table saw.
1. Never start your table saw with the wood piece you are planning to cut positioned up against the saw blade. Instead, start you saw and let the saw blade reach its full speed before you move the wood piece against the saw blade for cutting. Use light pressure to move the wood piece against the blade. Never force the wood.
Dewalt 12 Saw Blade
2. Never reach around or over the saw blade! Fingers, hands, and forearms are no match for a spinning or non-spinning saw blade.
3. Invariably, wood slivers or cut off pieces of wood will become jammed or wedged between the saw blade, the anti-kickback pawls, and the table top. Before you attempt to remove any of these jammed pieces of wood, turn off the power to the table saw and wait until the blade has completely stopped spinning.
4. Always wear safety glasses when operating your table saw.
5. When cutting long or wide pieces of wood, use an adjustable saw horse or supportive device to rest the wood on that is not resting on the saw's table top. Otherwise, the unsupported weight of the board may cause the wooden board to shift or buckle on the table and create safety and cutting problems.
6. Many table saws' "OFF/ON" switches now come with lockable latch holes. If you have kids, always keep your table saw locked when you are not using it. A padlock or cable lock can be used to lock up the "OFF/ON" switch. If you cannot lock your "OFF/ON" switch, always keep your saw unplugged when it is not in use.
7. To keep the wood piece from moving when you are using a miter gauge, cut to shape and glue a piece of sandpaper to the face of the miter gauge. The sandpaper will help keep the piece of wood from moving while it is being cut. Also, make sure that you have your miter gauge locked in place before you begin cutting.
8. Do not try to cut more than one piece of wood at a time!
9. You can use a combination square to double check your saw blade's 45 degree and 90 degree bevel adjustments. You can also use a combination square to make sure that both ends of your saw blade are properly aligned/positioned.
10. When using the table saw do not stand directly in front of the saw blade - instead, stand to either side of it. This will help keep you from getting hurt if the back of the spinning saw blade catches a piece of cut wood and throws it forward during cutting.
11. Turn your table saw off and remove the table saw's electrical cord from its power source before you change blades, install or remove accessories, make repairs, or perform any sort of cleaning or maintenance on your saw.
12. Never operate your saw without the throat plate (or table insert) being in place. Also, before you start using your saw, make sure that you have adjusted your plate/insert so it is flush with the table top surface. You can do this by tightening or loosening the plate's/insert's adjustment screws. Resting a ruler cross-wise over the throat plate/table insert after it has been inserted into its position on the table top will allow you to see which screws you need to tighten or loosen to make the plate/insert level with the table top.
I hope these tips and safety reminders will be of help to you!
Special Price!!! Freud D0760X Diablo Ultra Finish Saw Blade ATB 7-1/4-Inch by 60t 5/8-Inch Arbor
Click for larger image and other views
Freud D0760X Diablo Ultra Finish Saw Blade ATB 7-1/4-Inch by 60t 5/8-Inch Arbor Feature
- Features Freud's Exclusive TiCo Hi-Density Carbide designed specifically for crosscutting applications
- Ultra thin kerf for fast, easy cutting and minimum waste
- Anti vibration Technology reduces noise and extends cutting life and Laser Cut steel blade body for smoother cuts and flatness
- Perma-Shield Non-Stick Coating reduces friction, heat build up which adds to longer blade life
- Freud's Limited Lifetime Guarantee
Freud D0760X Diablo Ultra Finish Saw Blade ATB 7-1/4-Inch by 60t 5/8-Inch Arbor Overview
Super thin laser cut kerf (small diameter blades only) provides faster, cleaner, more exacting cuts. Perma Shield coating shields blade against heat, gumming, and corrosion. Durable micrograin titanium carbide tipped teeth are impact resistant to hold their edge longer. Laser cut stabilizer vents trap noise and vibration and stabilize blade. Laser cut heat expansion slots reduce heat and blade warp. Tri metal shock resistant brazing for stronger carbide teeth. No. D0436X: 4 3 8'' diameter, 36T, 20mm arbor No. D0516X: 5 3 8'' diameter, 16T, 10mm arbor No. D0524X: 5 3 8'' diameter, 24T, 10mm arbor No. D0536X: 5 3 8'' diameter, 36T, 10mm arbor No. D0620X: 6'' diameter, 20T, 1 2'' arbor No. D0640X: 6'' diameter, 40T, 1 2'' arbor No. D0624X: 6 1 2'' diameter, 24T, 5 8'' round and diamond knockout arbor No. D0624A: 6 1 2'' diameter, 24T, 5 8'' round and diamond knockout arbor No. D0641X: 6 1 2'' diameter, 40T, 5 8'' diamond knockout arbor No. D0724X: 7 1 4'' diameter, 24T, 5 8'' round and diamond knockout arbor No. D0724A: 7 1 4'' diameter, 24T, 5 8'' round and diamond knockout arbor No. D0724W: 7 1 4'' diameter, 24T, diamond knockout arbor only, Available Only At Woodburn, Mesquite No. D0740X: 7 1 4'' diameter, 40T, 5 8'' round and diamond knockout arbor No. D0740A: 7 1 4'' diameter, 40T, 5 8'' round and diamond knockout arbor No. D0760X: 7 1 4'' diameter, 60T, 5 8'' diamond twist out arbor No. D0760A: 7 1 4'' diameter, 60T, 5 8'' round and diamond knockout arbor No. D0824X: 8 1 4'' diameter, 24T, 5 8'' round and diamond knockout arbor No. D0840X: 8 1 4'' diameter, 40T, 5 8'' round and diamond knockout arbor No. D0860S: 8 1 2'' diameter, 60T, 5 8'' round and diamond knockout arbor No. D1024X: 10'' diameter, 24T, 5 8'' round arbor No. D1040X: 10'' diameter, 40T, 5 8'' round arbor No. D1040A: 10'' diameter, 40T, 5 8'' round arbor No. D1050X: 10'' diameter, 50T, 5 8'' round arbor No. D1060X: 10'' diameter, 60T, 5 8'' round arbor No. D1080X: 10'' diameter, 80T, 5 8'' round aFreud D0760X Diablo Ultra Finish Saw Blade ATB 7-1/4-Inch by 60t 5/8-Inch Arbor Specifications
For a blade dedicated to cutting ultra-fine finish work with remarkably clean, chip-free results, look no further than the Freud D0760X Diablo 7.25-Inch Ultra-Fine-Finish Saw Blade. Ideal for fine cabinetmaking, this is your go-to blade for slicing through oak, pine, melamine, veneer plywood, and delicate molding. For strong, long-lasting resistance, the blades feature a tough steel plate and high-density carbide tips. |
 |
|
Achieving premium results when creating finish crosscuts in ultra-fine materials is all about clean, accurate cuts. The Freud D0760X makes this process easy, fast, and precise. To save you time, most cuts made by this blade require little to no sanding.
Trim carpenters, fine cabinetmakers, and avid do-it-yourselfers will want to keep this blade on hand for those special jobs that call for making ultra-fine finish crosscuts in delicate pieces. Appropriate application materials include oak, pine, melamine, veneer plywood, and delicate molding.
Produces Smooth, Quiet Cuts with Laser-Cut Kerf
The Freud D0760X's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.59-inch kerf between the blade's 60 ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.
An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life.
Features Shock-Resistant Carbide for Long-Lasting Precision
So you can count on it over the long term, the Freud D0760X is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.
Fits Circular Saws
The Freud D0760X is a great addition to your workshop because it's designed with the versatility to fit a variety of circular saws.
This product is covered by Freud's Limited Lifetime Warranty.
What's in the Box
Freud D0760X Diablo 7.25-Inch Ultra-Fine-Finish Saw Blade.
SAVE NOW on the special offers below!
Available In Stock. |
| This Freud D0760X Diablo Ultra Finish Saw Blade ATB 7-1/4-Inch by 60t 5/8-Inch Arbor ships for FREE with Super Saver Shipping. |
Price : Click to Check Update Prices Please. |
